 |
Bullard ADP20 |
This Ambient Air pump supplies air to four hood style respirators or to six half or full face mask respirators, approved to operate at 15psi or less. Operation is simple: just plug in, set the appropriate pressure and go to work. respirators.
FEATURES:
- air flow: 30cfm at 5psi
- air motor requires a continuous supply of 85cfm air volume at 95psi for optimum performance
Supplied-air respirators used with this pump must be NIOSH approved
to operate at 15psi or less.
Requirements
for operation:
Grade D quality breathing-air at minimum pressure required by respirator
and maximum pressure of 125psi. (See the Compressed Gas Association
Commodity Specification; G-71.)
*
These
units DO NOT remove Carbon Monoxide.
|
 |
Bullard Breathing Line |
Bullard brand breathing line is approved for use with all of Bullard's supplied-air respirators. Offered in 3/8" I.D. for use with high pressure air supplies and 1/2" I.D. to be used with Ambient Air Pumps.
|
 |
Bullard EDP10 |
The most popular of Bullard's Ambient Air Pumps, the EDP10, supplies air for one continuous flow hood/helmet style respirator or two tight-fitting facepiece style respirators, approved to operate at 15psi or less.
FEATURES:
- Supplied-air respirators used with this pump must be NIOSH approved to operate at 15psi or less.
Requirements
for operation:
Grade D quality breathing-air at minimum pressure required by respirator
and maximum pressure of 125psi. (See the Compressed Gas Association
Commodity Specification; G-71.)
*These units DO NOT remove carbon monoxide.
|
 |
Bullard EDP16TE |
This Ambient Air pump supplies air to two continuous flow helmet style respirators or to three tight-fitting facepiece style respirators, approved to operate at 15psi or less. Operation is simple: just plug in, set the appropriate pressure and go to work.
FEATURES:
- air flow: 16cfm at 5psi
- available in hazardous duty version
Supplied-air respirators used with this pump must be NIOSH approved
to operate at 15psi or less.
Requirements
for operation:
Grade D quality breathing-air at minimum pressure required by respirator
and maximum pressure of 125psi. (See the Compressed Gas Association
Commodity Specification; G-71.)
*
These
units DO NOT remove Carbon Monoxide.
|
 |
Bullard Ambient Air Pump Service Kits |
Keeping your Ambient Air Pump in top shape will extend the life of the unit. Install a new Outlet Filter every 200 hours of use and the Inlet filter can be used up to 500 hours depending on jobsite conditions.
Each Ambient Air Pump Service Kit includes an Outlet Filter, Inlet Filter and Carbon Vanes, with proper maintenance, can last more than 5000 hours.
Requirements for operation:
Grade D quality breathing-air at minimum pressure required by respirator and maximum pressure of 125psi. (See the Compressed Gas Association Commodity Specification; G-71.
Supplied-air respirators used with this pump must be NIOSH approved to operate at 15psi or less.
* These units DO NOT remove Carbon Monoxide.
|
