Dustmaster® 8,000 CFM Electric Dust Collector
A dust collector creates an engineered air flow in an enclosure, providing ventilation and collecting airborne dust and debris. Abrasive blasting performed in an enclosure requires a dust management system for compliance with OSHA regulations governing the work site. Removing airborne dust and debris from an enclosure improves work site safety and visibility, increasing production rates. The Dustmaster® 8,000 CFM Electric Dust Collector has a reverse incline blade fan matched to a 25 horsepower electric motor to generate up to 8,000 CFM of air flow. Typical applications include blast rooms, blast yards, bridges, oil refineries, offshore platforms, pipelines, shipyards, storage tanks, and water treatment plants.

INCREASED PRODUCTION

The Dustmaster® 8,000 CFM Dust Collector creates an engineered air flow up to 8,000 cubic feet per minute, providing ventilation and collecting airborne dust and debris from an enclosed work site. By removing airborne dust and debris, workers have better visibility to the work surface, increasing production rates.

AVAILABILITY

As the largest provider of surface preparation and protective coatings equipment in the world, our inventory levels and product availability are unmatched.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Dustmaster® 8,000 CFM Electric Dust Collector (Reverse Incline Blade Fan)
The reverse incline blade fan matched with the Baldor® motor produces up to 8,000 CFM of air flow, delivering optimal performance over other dust collectors in its class.
Dustmaster® 8,000 CFM Electric Dust Collector (25 HP Electric Motor by Baldor®)
The 25 horsepower electric Baldor® motor, with a proven history of reliability, ease of maintenance, and are supported by a vast network of service centers.
Dustmaster® 8,000 CFM Electric Dust Collector (16-inch ID Duct Hose Inlet Ports)
Two 16” I.D. duct hose inlet ports positioned for work site application flexibility with one on each side. Each inlet port includes a tie-off point to help secure the duct hose in place.
Dustmaster® 8,000 CFM Electric Dust Collector (Easy-to-access Control Box)
Easy-to-access control box with Emergency Stop Button for fast system shutdown.

Key Features

8,000 CFM (maximum) air flow rate
25 HP Electric Engine
Reverse Incline Blade Fan
Two 16” I.D. Duct Hose Inlets
Reverse Pulse Jet System
6” Discharge Auger System
Pneumatic Vibrator
Trailer-Mounted with Electric Brakes
Dimensions: 8’ W x 19’8” L x 9’11” H
Weight: 5509 (empty)

Optional Accessories

Duct Hose

Duct Hose

Duct hose is available in multiple sizes and lengths to customize your work site.

Dustmaster® Filter Cartridges

dustmaster-50-000-cfm-tier-iii-diesel-dust-collectors-accessories-(filter-cartridges)

Marco manufactured Dustmaster® Filter Cartridges are available with multiple filter media options.

Duct Hose Couplings and Clamps

Duct Hose Couplings and Clamps

Duct hose couplings and clamps are available in multiple styles and sizes to work with your duct hose.

Cartridge-Style Respirators

Cartridge-Style Respirators

Marco offers several different types of cartridge-style respirators and replacement cartridges.

Literature

Technical Information

Videos

Dustmaster® 8,000 CFM Electric Dust Collector (25 HP Electric Motor by Baldor®)

25 HP Electric Motor by Baldor®

Baldor® motors have a proven history of reliability, ease of maintenance, and are supported by a vast network of service centers.

Dustmaster® 8,000 CFM Electric Dust Collector (Reverse Pulse Jet System)

Reverse Pulse Jet System

The reverse pulse jet system sends intermittent bursts of compressed air into the interior of the filter cartridges, purging collected dust and debris from the exterior of the filter cartridges. Collected dust and debris falls to the bottom of the hopper for removal by the auger system.

Dustmaster® 8,000 CFM Electric Dust Collector (Auger System)

Auger System

A 6” screw-flight auger system moves the collected dust and debris from the hopper. The elevated position of the discharge point is compatible with a variety of receptacles.

Dustmaster® 8,000 CFM Electric Dust Collector (Emergency-Stop Devices)

Emergency-Stop Devices

An Emergency-Stop Device is located on the operator station for fast system shutdown.

Dustmaster® 8,000 CFM Electric Dust Collector (16-inch ID Duct Hose Inlet Ports)

16” I.D. Duct Hose Inlet Ports

The Dustmaster® 8,000 CFM Electric Dust Collector has two 16” I.D. duct hose inlet ports positioned for work site application flexibility with one on each side. Each inlet port includes a tie-off point to help secure the duct hose in place.

Dustmaster® 8,000 CFM Electric Dust Collector (Hopper-Mounted Pneumatic Vibrators)

Hopper-Mounted Pneumatic Vibrators

Hopper-mounted pneumatic vibrators move collected dust and debris from hopper walls into the auger system for discharge. By minimizing the amount of dust and debris collected on the hopper walls, cleaning and maintenance time is reduced.

Dustmaster® 8,000 CFM Electric Dust Collector (Large Access Panel)

Large Access Panel

The 12” square access manway is designed for easy access to internal components for cleaning and maintenance.

Dustmaster® 8,000 CFM Electric Dust Collector (Premium Tires)

Premium Tires

The premium Goodyear® 215/75R17.5 (16-ply rated) tires are specifically designed for trailer applications with improved handling on highways and an extended life.

Dustmaster® 8,000 CFM Electric Dust Collector (Dustmaster® Dust Collector Filter Cartridges)

Dustmaster® Dust Collector Filter Cartridges

The Dustmaster® 8,000 CFM Electric Dust Collector uses nine filter cartridges to collect and trap airborne dust and debris. Marco manufactured filter cartridges are available with multiple filter media options for your work site applications.

Dustmaster® 8,000 CFM Electric Dust Collector (Power Cable Bracket)

Power Cable Bracket

A heavy-duty power cable bracket is mounted on the front of the frame and engine mount for easily storing cords during transport.

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us