Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collectors
A dust collector creates an engineered air flow in an enclosure, providing ventilation and collecting airborne dust and debris. Abrasive blasting performed in an enclosure requires a dust management system for compliance with OSHA regulations governing the work site. Removing airborne dust and debris from an enclosure improves work site safety and visibility, increasing production rates. The Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector has a reverse incline blade fan matched to a 174 horsepower Perkins® Tier III diesel engine to generate up to 50,000 CFM of air flow. Typical applications include blast rooms, blast yards, bridges, oil refineries, offshore platforms, pipelines, shipyards, storage tanks, and water treatment plants.

INCREASED PRODUCTION

The Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector creates an engineered air flow up to 50,000 cubic feet per minute, providing ventilation and collecting airborne dust and debris from an enclosed work site. By removing airborne dust and debris, workers have better visibility to the work surface, increasing production rates.

DUAL WHEEL DUAL AXLE TRAILER

The 36 foot trailer is designed with dual axles and dual wheels for rugged work sites. This unique configuration can navigate uneven terrain while supporting the unit.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Improved Handling)
The weight of the unit is distributed over eight tires, improving handling and maneuverability over uneven surfaces.
Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Engine Exhaust)
Engine exhaust is vented through the fan, directing it away from the work area.
Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Low Discharge Auger)
The low, 56” inch height of the discharge auger is ideal for emptying collected dust in to disposal drums.
Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Large Capacity Fuel Tank)
The large capacity fuel tank holds 116 gallons of diesel fuel for a long run life.

Key Features

50,000 CFM (maximum) air flow rate
174 HP, Tier III Diesel Engine
Manual Twin Plate PTO Clutch
Reverse Incline Blade Fan
Six 20” I.D. Ducting Inlets
Reverse Pulse Jet System
6” Discharge Auger System
Pneumatic Vibrators
Dual Axle - Dual Wheel Trailer
116 gallon Fuel Tank

Optional Accessories

Dustmaster® Filter Cartridges

dustmaster-50-000-cfm-tier-iii-diesel-dust-collectors-accessories-(filter-cartridges)

Marco manufactured Dustmaster® Filter Cartridges are available with multiple filter media options.

Duct Hose

Duct Hose

Duct hose is available in multiple sizes and lengths to customize your work site.

Duct Hose Couplings and Clamps

Duct Hose Couplings and Clamps

Duct hose couplings and clamps are available in multiple styles and sizes to work with your duct hose.

Cartridge-Style Respirators

Cartridge-Style Respirators

Marco offers several different types of cartridge-style respirators and replacement cartridges.

Literature

Videos

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (174 HP Tier III Diesel Engine by Perkins®)

174 HP Tier III Diesel Engine by Perkins®

Perkins® engines have a proven history of reliability, ease of maintenance, and are supported by a vast network of service centers.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Electronic Engine Control)

Electronic Engine Control

The electronic engine control adjusts engine speed and monitors the engine’s performance, including oil pressure, RPM, engine temperature, and voltage. The control interface and digital display make operation and monitoring simple.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Manual Twin Plate PTO Clutch)

Manual Twin Plate PTO Clutch

The Power-Take-Off (PTO) clutch transfers power from the Perkins® engine to the reverse incline blade fan. The manual engagement system provides proven performance and reliability, reducing downtime compared to complex hydraulic systems.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Reverse Pulse Jet System)

Reverse Pulse Jet System

The reverse pulse jet system sends intermittent bursts of compressed air into the interior of the filter cartridges, purging collected dust and debris from the exterior of the filter cartridges. Collected dust and debris falls to the bottom of the hopper for removal by the auger system.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Auger System)

Auger System

A 6” screw-flight auger system moves the collected dust and debris from the hopper. The position of the discharge point is compatible with a variety of receptacles.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Emergency-Stop Devices)

Emergency-Stop Devices

Emergency-Stop Devices are located at the rear of the unit and the operator station for fast system shutdown.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (20” I.D. Duct Hose Inlet Ports)

20” I.D. Duct Hose Inlet Ports

The Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector has six 20” I.D. duct hose inlet ports positioned for work site application flexibility with two at the rear, and two on each side.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Hopper-Mounted Pneumatic Vibrators)

Hopper-Mounted Pneumatic Vibrators

Hopper-mounted pneumatic vibrators move collected dust and debris from hopper walls into the auger system for discharge. By minimizing the amount of dust and debris collected on the hopper walls, cleaning and maintenance time is reduced.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Large Access Manway)

Large Access Manway

The 20” square access manway is designed for easy access to internal components for cleaning and maintenance.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Dustmaster® Dust Collector Filter Cartridges)

Dustmaster® Dust Collector Filter Cartridges

The Dustmaster® 50,000 CFM Tier III Diesel Dual Axle - Dual Wheel Dust Collector includes 56 filter cartridges to collect and trap airborne dust and debris. Marco manufactured filter cartridges are available with multiple filter media options for your work site applications.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (Premium Tires)

Premium Tires

The premium 10-ply tires are specifically designed for trailer applications with improved handling on highways and an extended life.

Dustmaster® 50,000 CFM Tier III Diesel Dual Axle Dual Wheel Dust Collector (On-board Duct Hose Storage)

On-board Duct Hose Storage

The large trailer deck design with tie-down rings provides space for on-board storage of up to 150 feet of 20” I.D. duct hose.

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us