Spraymaster EP-50 Plural Component Sprayer
The Spraymaster® EP-50 Plural Component Spray System is a high-pressure spray system used to apply plural component coatings to a work surface. This precise system uses an electronically controlled valve to adjust the mix ratio of the materials. This method eliminates the need for changing out pump lowers to adjust the mix ratio, saving valuable time and increasing production. Spraymaster® Plural Component Spray Systems are mounted on a heavy-duty durable frame with fork pockets, designed to hold up in tough work conditions. Typical applications include paint booths, paint yards, bridges, oil refineries, pipelines, railcar shops, storage tanks and water towers.

GO GREEN

As the demand for environmentally-friendly coatings increases, manufacturers are producing coatings that release less Volatile Organic Compounds (VOC). Traditional coatings use a high percent of solvents to carry the coating to the surface. The Spraymaster® EP-50 Plural Component Sprayer uses high solid coatings that have little to no solvents, reducing the amount of VOC’s released in to the atmosphere, making it an environmentally friendly product.

REDUCED COST

With the Spraymaster® EP-50 Plural Component Sprayer, waste is reduced as the resin and catalyst are stored in two separate 25 gallon heated coating tanks and mixed only as needed. This system requires only components from the gun splitter to the airless spray gun be flushed and cleaned after each use. These features significantly reduce job costs by reducing coating volume, solvent waste, and labor hours.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Spraymaster® EP-50 Plural Component Sprayer (25 Gallon Heated Coating Tanks)
25 gallon heated coating tanks are constructed with a carbon steel shell and a stainless steel lining that resists chemically-reactive and corrosive materials.
Spraymaster® EP-50 Plural Component Sprayer (Digitally Controlled Metering System)
The digitally controlled metering system provides instant access to the mix ratio, pressure rating, material temperature, and flow rates. The mixing ratio is monitored within predefined tolerance limits, stopping production if accuracy exceeds ±5%.
Spraymaster® EP-50 Plural Component Sprayer (Dosing Technology)
The Graco® dosing technology provides unmatched precision mixing and ratio assurance. The catalyst component is injected at higher pressure into the resin component, providing a uniform blended coating at higher flow rates.

Key Features

Four-wheel cart or fork-pocket skid mounting options
5,000 psi model
Installed electrical control box sized to fit your electricity needs
25 gallon stainless steel-lined heated coating tanks
Three tank option for quick color changes

Optional Accessories

Heated Hose Bundles

Heated Hose Bundles

Marco engineered and assembled electric or water-jacketed heated hose bundles are stocked in a variety of lengths.

Conventional Spray Guns

Conventional Spray Guns

Marco stocks a large selection of conventional spray guns.

Gun Splitter

Gun Splitter

Use two spray guns with one spray system. Independently clean and flush one gun while the other remains in use.

Electronic Tank Level Controls

Electronic Tank Level Controls

Electronically measure coating fill levels within the Spraymaster® heated coating tanks.

Literature

Technical Information

Videos

aVg1ed03UqE
Spraymaster® EP Plural Spray Systems Video
Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us