Blastmaster® 6.5 Cu. Ft. Wet Abrasive Blasting Pot
The ​Vapormaster® 6.5 Cu. Ft. Abrasive Blasting Pot is a pressure vessel used as part of an abrasive blasting system to deliver a mixture of compressed air, abrasive, and water to a work surface. Marco blast pots are proudly engineered and manufactured in the USA and built in accordance with ASME guidelines. The Vapormaster® 6.5 Cu. Ft. Abrasive Blasting Pot is part of a blasting system that creates a water and abrasive mixture to prepare a blast surface while minimizing dust generated during the blasting process. By reducing dust during blasting, the operator has improved visibility at the work site. Typical applications include coating removal, concrete cleaning, concrete repair and restoration, steel tanks, and automotive repair and restoration. Common abrasives include crushed glass, garnet, mineral abrasives, and slags.

LOWER DUST

The Vapormaster® 6.5 Cu. Ft. Abrasive Blasting Pot sends an abrasive and water mixture to the work surface, reducing dust generated during the blasting process. Lower dust levels increase visibility and reduce the time required to clean the work area.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Blastmaster® 6.5 Cu. Ft. Wet Abrasive Blasting Pot (Remote Control Selector Knob)
The dual operating system can alternate between pneumatic and 12-volt DC electric with the turn of a knob.
Blastmaster® 6.5 Cu. Ft. Wet Abrasive Blasting Pot (Steel Frame)
The blast pot and water tank are secured in a frame constructed of heavy-wall steel tubing with large opening fork pockets and lifting lugs for ease of transport.
Blastmaster® 6.5 Cu. Ft. Wet Abrasive Blasting Pot (AMSE Guidelines)
The blast pot is built in accordance with ASME guidelines to 200 psi working pressure and is protected from corrosion by a galvanized coating on interior and exterior surfaces.
Blastmaster® 6.5 Cu. Ft. Wet Abrasive Blasting Pot (110 Gallon Capacity)
With a capacity of 110 gallons, the on-board water tank conveniently streamlines the setup process.

Key Features

Blast pot rated to 200 psi working pressure
110 gallon water tank
Alternate between pneumatic and electric remote control systems
Certified pressure-relief valve
Transport frame with fork-pockets and lifting lugs
Empty Weight: 950 lbs.
Overall Height: 50"
Width: 34"
Depth: 75"

Optional Accessories

Abrasives

Abrasives

Choose from an extensive range of abrasives for any blasting surface or job.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Blast Nozzles

Abrasive Blasting Nozzles

A wide variety of blast nozzles are available to meet even the most challenging work site requirements.

Protective Clothing

Protective Clothing

Marco offers a variety of light weight coverall options, including DuPont® Tyvek®, to protect workers from water and overspray.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us