Blastmaster® 950 CFM Air Dryer
Moisture Management Systems remove water vapor from the compressed air stream. Water entering an abrasive blasting system causes wet abrasive, the leading cause of work site downtime. Wet abrasive reduces production rates by causing poor abrasive flow through the abrasive blasting system, resulting in excessive wear on equipment, increasing maintenance costs, and increasing abrasive consumption. The Blastmaster® 950 CFM Air Dryer removes up to 99% of the water present in compressed air by cooling the compressed air and then passing it through moisture absorbing desiccant tablets. Typical applications include blast rooms, blast yards, bridges, offshore platforms, oil refineries, pipelines, shipyards, and storage tanks. Commonly used with abrasive blasting pots, airless sprayers, conventional sprayers, and pneumatic tools.

INCREASED DRYING CAPACITY

The Blastmaster® 950 CFM Air Dryer removes more water vapor than standard aftercoolers, passing cooled and compressed air through desiccant tablets to absorb water vapor, converting it to a liquid solution that can be drained from the vessel.

REDUCED DOWNTIME

Dry air is critical when using moisture sensitive abrasives, such as steel shot, steel grit, and fine mesh abrasives. Wet abrasive clogs abrasive metering valves and nozzles, leading to excessive wear, resulting in costly downtime.

APPLICATION VERSATILITY

The Blastmaster® 950 CFM Air Dryer is available with a pneumatic or an electric motor.

Blastmaster® 950 CFM Air Dryer (Steel-reinforced Flexible Transfer Hose Maintenance)
Maintenance of the steel-reinforced flexible transfer hose assembly can be performed quickly in the field using commonly available parts, reducing downtime and repair costs.
Blastmaster® 950 CFM Air Dryer (Galvanized Tank)
The coalescing tank is galvanized using a full-immersion, hot-dip process, completely covering the interior and exterior surfaces, providing extended protection against corrosion and rust.
Blastmaster® 950 CFM Air Dryer (Fork-pocket Skid)
The Blastmaster® 950 CFM Air Dryer includes a fork-pocket skid for increased mobility.

Key Features

Coalescing tank galvanized inside and out
Field-serviceable transfer hose assembly
Pneumatic (4 HP) or electric (5 HP) motor
Aftercooler core constructed with corrosion-resistant aluminum
Spherical tower packing
Inlet filter with 3” port
Outlet filter with one 3” port and two 1” ports

Optional Accessories

Air Hose Fittings & Ball Valves

Air Hose Fittings and Ball Valves

Air hose fittings are available in 2 Lug, 4 Lug and Hammer Lock styles. Ball Valves are available in 1/4” I.D. to 4” I.D.

Coupled Air Hose

Coupled Air Hose

Additional air hose, air hose couplings, and air hose assemblies are available.

Whip Check Safety Cables

Whip Check Safety Cables

Whip check safety cables are available and comply with OSHA requirement 29 CFR 1926.302.

Desiccant

Desiccant

Marco offers desiccant in 50 lbs. bags or pails, and 506 lbs. drums, and 2000 lbs. bulk bags.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us