Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pots
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pots feature a pressure-hold remote control system that minimizes response time between stopping and starting. This configuration provides the advantage of a constantly pressurized tank that does not need to be repressurized each time the remote control switch is engaged. The pressure vessel is proudly engineered and manufactured in the USA and built in accordance with ASME guidelines, and is rated to 150 psi working pressure for use with today’s high output compressors. The Blastmaster 130 Remote Control System and Blastmaster Maxum III Abrasive Metering Valve make this the ideal setup for blast rooms, blast yards, bridges, oil refineries, pipelines, and storage tanks. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, slags, and steel grit/shot.

INCREASED PRODUCTION

The Blastmaster 130 Remote Control System is a pressure-hold remote control system ideal for high production applications where an operator is frequently activating and deactivating the remote control switch during operator repositioning. The pressure-hold remote control system allows the vessel to remain pressurized when the remote control switch is deactivated.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

PORTABILITY

A heavy-duty handle, 16” semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.

Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Highlights (90-Degree Cone Bottom)
The steep angle of the 90° cone bottom provides significantly improved abrasive flow versus a 60° cone bottom.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Highlights (Maxum III Abrasive Metering Valve)
The Blastmaster Maxum III Abrasive Metering Valve’s screw-type design delivers superior metering, providing a precise air and abrasive mixture for maximizing production.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Highlights (Muffler)
A muffler comes standard on all Blastmaster blast pots, reducing noise and trapping particles as they exit the exhaust port during the depressurization process.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Highlights (130 Remote Control System)
The Blastmaster 6.5 HP-Series Blast Pot is outfitted with a Blastmaster 130 Remote Control System featuring the High-Flow GateKeeper Air Valve in pneumatic or electric configuration.

Key Features

6.5 Cubic Foot Capacity
Available with Pneumatic or Electric Remote Control System
Blastmaster® 1-1/2” High-Flow GateKeeper Air Valve
Abrasive Blasting Pot Muffler
Galvanized pipe fittings
Two lifting lugs
16” semi-pneumatic tires
Empty weight: 390 lbs.

Optional Accessories

Loading Skid

Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Accessories (Loading Skid)

The Loading Skid helps to protect the valves from damage while transporting the blast pot.

Blast Hose

Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Accessories (Blast Hose)

Blastmaster Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Abrasive Blasting Pot Moisture Separator

Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Accessories (Moisture Separator)

Abrasive Blasting Pot Moisture Separators remove excess moisture, oil, and other debris from compressed air before entering the blast pot.

Blast Nozzles

Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot Accessories (Blast Nozzles)

A wide variety of blast nozzles are available to meet most any job requirement.

Videos

UOH6RWRWxxU
Marco Blastmaster® Abrasive Blasting Pot Overview Video
Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us