Blastmaster® 3.5 Cu. Ft. HP-Series Abrasive Blasting Pots
The Blastmaster® 3.5 Cu. Ft. HP-Series Abrasive Blasting Pot is a pressure vessel used as part of an abrasive blasting system to deliver a mixture of abrasive and compressed air to a work surface. Marco blast pots are proudly engineered and manufactured in the USA and built in accordance with ASME guidelines. Each Marco blast pot is designed with added features to enhance work site safety. Blastmaster® Abrasive Blasting Pots are manufactured using higher quality materials that resist wear, reducing costly downtime and increasing production rates. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, and storage tanks. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, slags, and steel grit/shot.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

INCREASED PRODUCTION

The Blastmaster® 130 Remote Control System is a pressure-hold remote control system ideal for high production applications where an operator is frequently activating and deactivating the remote control switch during operator repositioning. The pressure-hold remote control system allows the vessel to remain pressurized when the remote control switch is deactivated.

PORTABILITY

A heavy-duty handle, 10” semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.

Blastmaster® 3.5 Cu. Ft. HP-Series Abrasive Blasting Pots (Blastmaster® 130 Remote Control System)
The Blastmaster® 3.5 HP-Series Blast Pot is outfitted with a Blastmaster® 130 Remote Control System in pneumatic or electric configuration.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot (Muffler)
A muffler comes standard on all Blastmaster blast pots, reducing noise and trapping particles as they exit the exhaust port during the depressurization process.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot (Blastmaster® Maxum III Abrasive Metering Valve)
The Blastmaster® Maxum III Abrasive Metering Valve’s screw-type design delivers superior metering, providing a precise air and abrasive mixture for maximizing production.
Blastmaster® 6.5 Cu. Ft. HP-Series Abrasive Blasting Pot (90 Degree Cone Bottom)
The steep angle of the 90° cone bottom provides significantly improved abrasive flow versus a 60° cone bottom.

Key Features

3.5 Cubic Foot Capacity
Available with Pneumatic or Electric Remote Control System
Abrasive Blasting Pot Muffler
Galvanized pipe fittings
Two lifting lugs
10” semi-pneumatic tires
Empty weight: 285 lbs
Overall height: 45”
Fill height: 45”
Width: 23”
Depth: 31”

Optional Accessories

Blast Nozzles

Abrasive Blasting Nozzles

A wide variety of blast nozzles are available to meet even the most challenging work site requirements.

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separator

Abrasive Blasting Pot Moisture Separators remove excess moisture, oil, and other debris from compressed air before entering the abrasive blasting pot.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Loading Skid

Loading Skid

The Loading Skid helps to protect the valves from damage while transporting the air-blast pot.

Videos

UOH6RWRWxxU
Marco Blastmaster® Abrasive Blasting Pot Overview Video
Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us