Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot
The Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot is a pressure vessel used as part of an abrasive blasting system to deliver a mixture of abrasive and compressed air to a work surface. Marco blast pots are proudly engineered and manufactured in the USA and built in accordance with ASME guidelines. Each Marco blast pot is designed with added features to enhance work site safety. Blastmaster® Abrasive Blasting Pots are manufactured using higher quality materials that resist wear, reducing costly downtime and increasing production rates. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, railcar shops, storage tanks, and water towers. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, slags, and steel shot & grit.

Enhanced Safety

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and deactivates upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

INCREASED PRODUCTION

The capacity of the Blastmaster 10 Cu. Ft. Abrasive Blasting Pot is able to hold up to 10 cubic feet of abrasive, increasing production by extending blasting time between each fill.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot (Sturdy Steel Base)
The sturdy steel base is designed to be be mounted on a mobile platform or in a fixed location under an abrasive hopper
Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot (Dual Off-Center Metering Valves)
Multiple abrasive outlets allow for the connection of a single metering valve at the bottom of the cone, or dual off-center metering valves.
Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot (Muffler)
A muffler comes standard on all Blastmaster blast pots, reducing noise and trapping particles as they exit the exhaust port during the depressurization process.
Blastmaster® 10 Cu. Ft. Abrasive Blasting Pot (90º Cone Bottom)
The steep angle of the 90° cone bottom provides significantly improved abrasive flow versus a 60° cone bottom.

Key Features

10.0 Cubic Foot Capacity
Single outlet pressure-release configurations
Single or dual-outlet pressure-hold configurations
Pneumatic or electric remote controls
Two lifting lugs
Empty weight: 415 lbs
Overall Height: 64 inches
Fill Height: 64 inches
Width: 26 Inches
Depth: 38 Inches

Optional Accessories

Blast Nozzles

Abrasive Blasting Nozzles

A wide variety of blast nozzles are available to meet even the most challenging work site requirements.

Abrasive Screen, Heavy-Duty Lid & Umbrella

Abrasive Screen, Heavy-Duty Lid & Umbrella

The abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Blastmaster® Aftercoolers

Blastmaster® Aftercoolers

A Blastmaster® Aftercooler with Coalescing Tank will remove damage-causing moisture, oil, and debris from the air stream.

Literature

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us