Blastmaster® 68P Remote Control System
Remote control systems give an operator the ability to remotely activate and deactivate the flow of air and abrasive at the nozzle. Pressure-release remote control systems pressurize and depressurize the blast pot each time the operator activates and deactivates the remote control switch, allowing for the blast pot to be filled between activation cycles. This increases productivity and eliminates the need for a pot tender. The Blastmaster® 68P Remote Control System is a pressure-release remote control system that uses a pneumatic signal from the remote control switch to remotely activate and deactivate a blast pot. Typical applications include concrete preparation, construction equipment maintenance, farm implements, light touch-up work, and swimming pool refurbishing.

REDUCED COST

The Blastmaster® 68P Remote Control System allows the operator to remotely activate and deactivate the abrasive blasting pot from the nozzle, eliminating the need for a pot tender.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control system.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Blastmaster® 68P Remote Control System Highlights (Gatekeeper Air Valve)
The Blastmaster® 68P Remote Control System includes a 1” GateKeeper Air Valve to control the air in to the blast pot.
Blastmaster® 68P Remote Control System Highlights (152P Switch)
The Blastmaster® 152P Remote Control Switch is OSHA 29 CFR 1910.244(b) compliant, allowing the operator to activate and deactivate the abrasive blasting pot at the nozzle.
Blastmaster® 68P Remote Control System Highlights (Diaphragm Outlet Valve)
The Blastmaster® 68P Remote Control System includes a 1” Diaphragm Outlet Valve made of corrosion-resistant materials for long life.

Key Features

Ideal for operating at distances up to 100 feet
OSHA-compliant
1” GateKeeper Air Valve Inlet
1” Diaphragm Outlet Valve
Blastmaster® 152P Remote Control Switch
190 Pneumatic Control Valve

Optional Accessories

Repair Parts & Kits

Repair Parts & Kits (Blastmaster® 120E & 120P Remote Control System)

Repair parts and kits are available for all components of this product.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Pneumatic Control Line

Pneumatic Control Line

Additional pneumatic control line, pneumatic control line assemblies, and pneumatic control line fittings are available.

Couplings and Blast Nozzle Holders

Couplings and Nozzle Holders

Marco offers several types of couplings and blast nozzle holders to meet the needs of a wide variety of applications.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us