Blastmaster® 130P Remote Control System
Remote control systems give an operator the ability to remotely activate and deactivate the flow of air and abrasive at the nozzle. Pressure-hold remote control systems are ideal for high production applications where an operator is frequently activating and deactivating the remote control switch during operator repositioning. The pressure-hold remote control system allows the vessel to remain pressurized when the remote control switch is deactivated. This eliminates the time waiting for the vessel to depressurize and pressurize, increasing production rates. The Blastmaster® 130P Remote Control System is a pressurehold remote control system that uses a pneumatic signal from the remote control switch to remotely activate and deactivate an abrasive blasting pot. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, railcar shops, shipyards, and storage tanks.

INCREASED PRODUCTION

The Blastmaster® 130P Remote Control System is for high production applications, where an operator is frequently activating and deactivating the remote control switch during operator repositioning.

REDUCED COST

The Blastmaster® 130P Remote Control System, used with an air-actuated abrasive metering valve, reduces abrasive consumption by stopping the abrasive flow in the abrasive metering valve before it enters the air stream, greatly reducing “abrasive chugging” at activation, optimizing blasting efficiency.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control system.

Blastmaster® Gatekeeper Air Valve
The Blastmaster® 1-1/2” High-Flow GateKeeper Air Valve activates and deactivates the flow of compressed air without depressurizing the abrasive blasting pot.
Blastmaster 152P Remote Control Switch
The Blastmaster® 152P Remote Control Switch allows the operator to activate and deactivate the abrasive blasting pot from the nozzle.
Blastmaster Remote Control System Pneumatic Solenoid 130P 190P
The 190 pneumatic solenoid is ideal for operating distances less than 100 feet.

Key Features

Adaptable to most abrasive blasting pots
OSHA-compliant
Blastmaster® 1-1/2” High-Flow GateKeeper Air Valve
Blastmaster® 152P Remote Control Switch

Optional Accessories

Repair Parts & Kits

Repair Parts & Kits (Blastmaster® 130P Remote Control System)

Repair parts and kits are available for all components of this system.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Blastmaster® Maxum III Abrasive Metering Valve

Blastmaster® Maxum III Abrasive Metering Valve

The Blastmaster® Maxum III Abrasive Metering Valve is an air-actuated, normally-closed metering valve for use with a pressure-hold remote control system.

Pneumatic Control Line

Pneumatic Control Line

Additional pneumatic control line, pneumatic control line assemblies, and pneumatic control line fittings are available.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us