Blastmaster® 123P Remote Control System
Remote control systems give an operator the ability to remotely activate and deactivate the flow of air and abrasive at the nozzle. Pressure-release remote control systems pressurize and depressurize the abrasive blasting pot each time the operator activates and deactivates the remote control switch, allowing for the abrasive blasting pot to be filled between activation cycles. This increases productivity and eliminates the need for a pot tender. The Blastmaster® 123P Remote Control System is a pressure-release remote control system that uses a pneumatic signal from the remote control switch to remotely activate and deactivate an abrasive blasting pot. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, railcar shops, shipyards, and storage tanks.

INCREASED PRODUCTION

The Blastmaster® 123P Remote Control System allows the abrasive blasting pot to be filled between activation cycles, increasing productivity and eliminating the need for a pot tender.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control system.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Tandem-Remote-Control-Valve
The Tandem Remote Control Valve is a single valve with a simple design and few replacement parts.
Blastmaster 123P 123E Remote Control System Pinch Ram
The Pinch Ram inside the Tandem Remote Control Valve has a rounded surface, extending the life of the Blowdown Hose Assembly.
Blastmaster 152P Remote Control Switch
The Blastmaster® 152P Remote Control Switch allows the operator to activate and deactivate the abrasive blasting pot from the nozzle.

Key Features

Increased production
OSHA-compliant
Heavy-duty Blowdown Hose Assembly
Blastmaster® 152P Remote Control Switch

Optional Accessories

Repair Parts & Kits

Repair Parts & Kits (Blastmaster® 123E & 123P Remote Control System)

Repair parts and kits are available for all components of this system.

Pneumatic Control Line

Pneumatic Control Line

Additional pneumatic control line, pneumatic control line assemblies, and pneumatic control line fittings are available.

Whip Check Safety Cables

Whip Check Safety Cables

Whip check safety cables are available and comply with OSHA requirement 29 CFR 1926.302.

Blast Hose

Blastmaster® Abrasive Blasting Hose

Blastmaster® Abrasive Blasting Hose is available in standard lengths of 50, 100 and 400 feet, and custom lengths up to 200 feet.

Literature

Technical Information

Videos

Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us