Blastmaster Maxum III Abrasive Metering Valve
An abrasive metering valve regulates the flow of abrasive from an abrasive blasting pot. Metering valves create optimum abrasive blasting efficiency by controlling the desired amount of abrasive entering the air stream. A lean air and abrasive mixture provides faster cutting, reduced abrasive consumption, increased productivity, and lower clean-up costs. The Blastmaster® Maxum III Abrasive Metering Valve is an air-actuated, normally-closed metering valve for use with a pressure-hold remote control system. When the remote control system is activated, an air signal is sent to the Blastmaster® Maxum III Abrasive Metering Valve, opening the valve, allowing abrasive to flow from the abrasive blasting pot. When deactivated, the Blastmaster® Maxum III Abrasive Metering Valve returns to the closed position, deactivating the flow of abrasive exiting the abrasive blasting pot. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, shipyards, and storage tanks. Common abrasives used include aluminum oxide, crushed glass, garnet, glass bead, mineral abrasives, staurolite, and steel grit/shot.

PRECISION METERING

The Blastmaster® Maxum III Abrasive Metering Valve screw-type design delivers superior metering, providing a precise air and abrasive mixture for maximizing production.

REDUCED DOWNTIME

The Blastmaster® Maxum III Abrasive Metering Valve one-piece base design reduces the number of service parts, simplifying the repair process and minimizing the amount of time needed to perform maintenance.

COMMITMENT TO QUALITY

Our commitment to producing the highest quality products in the industry demands strict control over our raw materials and manufacturing processes. All components used in the manufacturing of Marco products adhere to strict process controls as specified by Marco’s Quality and Engineering team.

Blastmaster-Maxum-Abrasive-Metering-Valve-Urethane-Seat
The Blastmaster® Maxum III Abrasive Metering Valve urethane seat lasts up to ten times longer than rubber.
Blastmaster-Maxum-Abrasive-Metering-Valve-Stainless-Steel-Insert
The Blastmaster® Maxum III Abrasive Metering Valve stainless steel insert is heat-treated to a Rockwell C 40-45, lasting up to ten times longer than carbon steel.
Blastmaster-Maxum-III-Abrasive-Metering-Valve-One-Piece-Base
The Blastmaster® Maxum III Abrasive Metering Valve one-piece base is through-hardened to a minimum Rockwell C 55, lasting up to five times longer than case-hardened bases.

Key Features

Precision metering
Air-actuated valve
High grade urethane seat
Tungsten carbide sleeve
Through-hardened one-piece base
Heat-treated, stainless steel insert
Clean-out port

Optional Accessories

Repair Parts & Kits

Repair Parts & Kits (Blastmaster® Maxum & Maxum III Abrasive Metering Valve)

Repair parts and kits are available for all components of this valve.

Abrasive Cut-Off Switch System

Abrasive Cut-Off Switch System

The Abrasive Cut-Off Switch System allows the operator to use the Abrasive Blasting Hose to “blow down” the work surface after abrasive blasting.

Multiport Sleeve

Multiport Sleeve

Fixed, pre-metered sleeve with .178”, .218”, .278”, and .343” ports for use with fine abrasives.

Whip Check Safety Cables

Whip Check Safety Cables

Whip check safety cables are available and comply with OSHA requirement 29 CFR 1926.302.

Literature

Technical Information

Videos

ttrEey5O5Hc
Marco Blastmaster® Maxum III Abrasive Metering Valve Video
Marco®, Barricade®, Blastmaster®, Dustmaster®, Spraymaster®, Vacmaster®, Xtreme-Duty®, and Smart Box™ are registered trademarks or trademarks of Marco.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Product details are based on published information at the time of publication. Product details are subject to change without notice. Contact Marco for more information.

Key Features

Optional Accessories

Abrasives
Blasting
Coating
Dust Collectors
Engineered Systems
Rental
Safety
Service,Repair & Modernization
Vacuums
www.marco.us
800.blast.it
800.252.7847
563.324.2519
fax: 563.324.6258
sales@marco.us